Services

All services are provided at an hourly rate plus the cost of lab testing.

  • $190 An hour for basic testing services
  • $250 An hour for hazardous exposure testing services (Mold, Abestos, etc.)
  • A travel surcharge is applied to inspections and consultations for locations that are further than 45 miles from Fort Collins, Colorado

Air Quality and Mold Testing

These services aim to identify and mitigate factors that could compromise indoor air quality, thus promoting a healthier living and working environment.

  • Volatile Organic Compounds (VOCs): Testing for common indoor pollutants like formaldehyde, benzene, and other chemicals emitted from building materials, furnishings, and household products.
  • Particulate Matter (PM): Measuring levels of fine and ultrafine particles (PM2.5, PM10) that can be inhaled deeply into the lungs, originating from sources like dust, smoke, and combustion.
  • Carbon Dioxide (CO2): Monitoring CO2 levels, which can indicate ventilation issues and affect cognitive function and comfort.
  • Carbon Monoxide (CO): Testing for this odorless, colorless gas that can be deadly if present at high levels, often caused by faulty heating systems or incomplete combustion.
  • Nitrogen Dioxide (NO2): Assessing levels of NO2, which is produced by combustion processes, such as gas stoves or vehicles, and can exacerbate respiratory issues.
  • Airborne Mold Spores: Sampling the air for mold spores to identify potential mold contamination, which can cause allergic reactions, asthma, and other respiratory issues.
  • Surface Testing: Taking samples from surfaces (walls, floors, HVAC systems) to detect mold growth.
  • Mycotoxins: Testing for toxic compounds produced by certain molds, which can have serious health effects if inhaled or ingested.
  • Dust Mites: Measuring dust mite allergens in the air or in dust samples, which are common triggers for asthma and allergic reactions.
  • Pet Dander: Testing for allergens from pets such as cats, dogs, and rodents, which can persist in the environment even after the pet is no longer present.
  • Pollen: Assessing indoor pollen levels, which can infiltrate from outside and exacerbate allergies.
  • Radon Gas: Testing for radon, a radioactive gas that can seep into buildings from the ground and is a leading cause of lung cancer.
  • Formaldehyde: Testing for formaldehyde levels, a common VOC found in building materials like plywood, particleboard, and some insulation materials, which can cause respiratory issues and is a known carcinogen.
  • Chemical Off-Gassing: Testing for chemicals released from new construction materials, furniture, or renovations, which can lead to poor indoor air quality.
  • Odor Analysis: Identifying and analyzing the sources of unpleasant or harmful odors, which may come from chemical contaminants, mold, or other sources.
  • Asbestos Fibers: Air sampling to detect the presence of asbestos fibers, which can cause serious respiratory diseases if inhaled, often found in older buildings.
  • Lead Dust: Sampling for lead dust, particularly in older buildings with lead-based paint, which can be harmful if inhaled or ingested.
  • Mercury: Testing for mercury vapors, particularly in environments where mercury-containing products or equipment have been used.
  • Ventilation Effectiveness: Evaluating the effectiveness of a building’s ventilation system in removing indoor air pollutants and bringing in fresh air.
  • Air Exchange Rates: Measuring how often indoor air is replaced with outdoor air, which is crucial for maintaining good indoor air quality.
  • Ozone Levels: Assessing indoor ozone levels, which can be generated by certain air purifiers, photocopiers, or outdoor air infiltration, and can be harmful to respiratory health.

Water Testing

These services help ensure that the water used for drinking, cooking, and bathing in residential or commercial properties is safe and free from harmful contaminants. ​

  • Heavy Metals: Testing for contaminants such as lead, copper, arsenic, and mercury, which can pose serious health risks.
  • Microbial Contaminants: Testing for bacteria, viruses, and other pathogens like E. coli and coliforms that could indicate contamination.
  • Chemical Contaminants: Analyzing for pesticides, herbicides, chlorine, chloramines, and other chemicals that may have leached into the water supply.
  • pH Levels: Testing to ensure the water is not too acidic or alkaline, which can affect taste, corrosion of pipes, and health.
  • Total Dissolved Solids (TDS): Measuring the concentration of dissolved substances in the water, which can affect water quality.
  • Groundwater Testing: For homes or buildings using well water, testing for potential contaminants from surrounding land , such as agricultural runoff or industrial activities.
  • Surface Water Testing: For properties drawing water from lakes, rivers, or reservoirs, ensuring that natural or man-made contaminants are not present.
  • Specifically testing for Legionella bacteria, which can cause Legionnaires’ disease, particularly in hot water systems, cooling towers, and other water systems in large buildings.
  • Determining the levels of calcium and magnesium in the water, which can contribute to scaling in pipes and appliances, affecting both the efficiency of heating systems and the quality of drinking water.
  • Testing for the presence of VOCs, such as benzene, toluene, and other industrial solvents that may leach into water from industrial or chemical processes.
  • Assessing the effectiveness of installed water filtration or purification systems to ensure they are adequately removing contaminants and providing safe drinking water.
  • Testing for radioactive contaminants like radon, uranium, and radium, which can naturally occur in groundwater and pose long-term health risks.
  • Checking for residues of agricultural chemicals that might have infiltrated the water supply, particularly in rural or agricultural areas.

EMF, RF, and MEP Testing

These testing services help identify and mitigate potential health risks associated with EMF, RF, and MEP (Microsurge Electrical Pollution aka “Dirty Electricity”) radiation in residential, commercial, and industrial environments. The goal is to create safer living and working spaces by reducing exposure to these invisible environmental factors.

  • Magnetic Fields: Measuring low-frequency magnetic fields typically generated by electrical wiring, appliances, and nearby power lines. High magnetic fields can affect sleep, health, and well-being.
  • Electric Fields: Testing for low-frequency electric fields from electrical circuits, outlets, and devices. These fields can affect sensitive individuals and contribute to a sense of unease or poor sleep quality.
  • Dirty Electricity (Electromagnetic Interference): Assessing the presence of dirty electricity, which is a form of electromagnetic pollution caused by spikes and surges of electricity traveling along power lines. This can occur due to the use of modern electronics and lighting systems that alter the standard electrical current.
  • Wireless Devices: Measuring RF radiation levels from wireless devices such as Wi-Fi routers, cell phones, tablets, smart meters, and cordless phones. These devices emit RF radiation that can be absorbed by the body, potentially leading to health concerns over long-term exposure.
  • Cell Towers and Antennas: Testing the RF radiation levels in and around buildings from nearby cell towers, broadcast antennas, and other wireless communication infrastructure.
  • Microwave Radiation: Assessing radiation from microwave ovens and other devices operating in the microwave frequency range.
  • Bluetooth and Smart Home Devices: Measuring RF emissions from Bluetooth-enabled devices and smart home technologies, such as smart speakers, thermostats, and security systems.
  • RF from Communication Towers: Assessing high-frequency EMR from communication towers, including cellular and radio broadcast towers.
  • Radar and Satellite Dishes: Testing for EMR from radar installations, satellite dishes, and other high-frequency sources that could contribute to overall exposure in a building or residential area.
  • Personalized Testing: For clients who are particularly sensitive to EMF/EMR, offering a thorough assessment of their home or workplace to identify and mitigate sources of electromagnetic exposure. This may include comprehensive testing across various frequencies and customized recommendations for reducing exposure.
  • Shielding Materials: Evaluating the effectiveness of shielding materials (like EMF shielding paints, fabrics, and films) that are intended to reduce or block EMF/EMR exposure.
  • Building Materials and Layout: Assessing the impact of building materials, window placements, and layout on EMF exposure, particularly in environments where minimizing EMF is a priority.
  • Grounding Quality: Testing the electrical grounding of a building to ensure it effectively reduces electric fields and lowers overall EMF exposure.
  • Earthing Products: Evaluating the effectiveness of earthing products, such as mats or sheets, which are designed to reduce electric fields by connecting the user to the earth’s surface.
  • Proximity to High-Voltage Power Lines: Measuring EMF levels for properties located near high-voltage power lines, substations, and transformers. This can be crucial for understanding potential long-term exposure risks.
  • Transformers and Electrical Panels: Testing for EMF emissions near electrical panels, transformers, and other high-voltage equipment within or near the building.
  • Appliances and Electronics: Testing common household appliances, such as refrigerators, televisions, computers, and induction cooktops, for EMF emissions. This helps in identifying high-emission devices and suggesting safer usage practices.
  • Earth-Based EMFs: Evaluating natural electromagnetic fields, such as those caused by geological formations (e.g., fault lines, underground streams) that can influence human health and well-being when they intersect with living spaces.
  • Continuous Monitoring: Providing long-term monitoring of EMF/EMR/RF levels in critical areas, such as bedrooms or home offices, to assess exposure patterns over time and identify peak exposure periods.
  • Exposure Risk Assessment: Analyzing cumulative exposure from various sources (both internal and external) to assess overall risk and recommend strategies for mitigation.

All services are provided at an hourly rate plus the cost of lab testing.

  • $190 An hour for on location testing services
  • $250 An hour for hazardous exposure testing services
  • A travel expense surcharge may apply (Generally any location further than 60 miles from Fort Collins, CO)